Art Resin Epoxy 1:1 | 4L Kit
Art Resin Epoxy 1:1 – Crystal Clear High-Gloss Finish (4L Kit)
Art Resin Epoxy 1:1 is a premium epoxy resin system formulated for resin art and coating applications. It delivers exceptional clarity, depth, and a smooth self-levelling finish for professional-looking results.
Key specifications
| Mix ratio | 1:1 by volume |
| Working time | Approx. 30 minutes at 25 °C |
| Pour depth | 1–12 mm per layer |
| Finish | Crystal clear, high gloss, self-levelling |
| Coverage | 1 litre ≈ 1 m² @ 1 mm thickness |
| Full cure | Approx. 72 hours |
Performance benefits
- Excellent clarity and depth for a clean, professional finish
- Self-levelling formulation for smooth, even coatings
- Low viscosity for easy spreading and effective bubble release
- UV-resistant formulation designed to reduce yellowing over time
- Durable cured surface suitable for long-term artwork and display pieces
Ideal applications
Suitable for a wide range of creative projects, including:
- Resin art and abstract artwork
- Canvas coatings and mixed media
- Timber artwork and sealed wood surfaces
- Coasters, trays, and decorative items
- Pigments, mica powders, and colour work
- Jewellery, moulds, and craft applications
Technical overview
Coverage
Coverage is based on a smooth, non-porous surface:
1 litre covers approximately 1 m² at 1 mm thickness.
How to use
- Measure Part A and Part B at a 1:1 ratio by volume.
- Mix thoroughly for a minimum of 3 minutes, scraping the sides and base.
- Pour, allow to self-level, then remove surface bubbles with gentle heat.
Note: Seal porous surfaces prior to coating to help prevent air release and resin absorption.
Kit contents
- 2 litre Resin (Part A)
- 2 litre Hardener (Part B)
Total mixed volume: 4 litres
Product storage
Keep containers tightly sealed when not in use. Store at room temperature (approximately 18 °C) and away from direct sunlight. Do not store containers directly on concrete floors.
Safety directions
Use in a well-ventilated area. Avoid contact with eyes and skin. Protective gloves, mask and safety glasses should be worn when mixing and using this product.
Over-exposure may cause sensitisation. Uncured material can be removed using a suitable solvent or methylated spirits, followed by washing with warm soapy water.
Always wear a suitable mask when using solvent-based cleaners.
Epoxy Resin Tips, Questions & Answers
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Art Resin Epoxy 1:1 | 4L Kit
Art Resin Epoxy 1:1 | 4L Kit
Art Resin Epoxy 1:1 – Crystal Clear High-Gloss Finish (4L Kit)
Art Resin Epoxy 1:1 is a premium epoxy resin system formulated for resin art and coating applications. It delivers exceptional clarity, depth, and a smooth self-levelling finish for professional-looking results.
Key specifications
| Mix ratio | 1:1 by volume |
| Working time | Approx. 30 minutes at 25 °C |
| Pour depth | 1–12 mm per layer |
| Finish | Crystal clear, high gloss, self-levelling |
| Coverage | 1 litre ≈ 1 m² @ 1 mm thickness |
| Full cure | Approx. 72 hours |
Performance benefits
- Excellent clarity and depth for a clean, professional finish
- Self-levelling formulation for smooth, even coatings
- Low viscosity for easy spreading and effective bubble release
- UV-resistant formulation designed to reduce yellowing over time
- Durable cured surface suitable for long-term artwork and display pieces
Ideal applications
Suitable for a wide range of creative projects, including:
- Resin art and abstract artwork
- Canvas coatings and mixed media
- Timber artwork and sealed wood surfaces
- Coasters, trays, and decorative items
- Pigments, mica powders, and colour work
- Jewellery, moulds, and craft applications
Technical overview
Coverage
Coverage is based on a smooth, non-porous surface:
1 litre covers approximately 1 m² at 1 mm thickness.
How to use
- Measure Part A and Part B at a 1:1 ratio by volume.
- Mix thoroughly for a minimum of 3 minutes, scraping the sides and base.
- Pour, allow to self-level, then remove surface bubbles with gentle heat.
Note: Seal porous surfaces prior to coating to help prevent air release and resin absorption.
Kit contents
- 2 litre Resin (Part A)
- 2 litre Hardener (Part B)
Total mixed volume: 4 litres
Product storage
Keep containers tightly sealed when not in use. Store at room temperature (approximately 18 °C) and away from direct sunlight. Do not store containers directly on concrete floors.
Safety directions
Use in a well-ventilated area. Avoid contact with eyes and skin. Protective gloves, mask and safety glasses should be worn when mixing and using this product.
Over-exposure may cause sensitisation. Uncured material can be removed using a suitable solvent or methylated spirits, followed by washing with warm soapy water.
Always wear a suitable mask when using solvent-based cleaners.
Epoxy Resin Tips, Questions & Answers
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Art Resin Epoxy 1:1 – Crystal Clear High-Gloss Finish (4L Kit)
Art Resin Epoxy 1:1 is a premium epoxy resin system formulated for resin art and coating applications. It delivers exceptional clarity, depth, and a smooth self-levelling finish for professional-looking results.
Key specifications
| Mix ratio | 1:1 by volume |
| Working time | Approx. 30 minutes at 25 °C |
| Pour depth | 1–12 mm per layer |
| Finish | Crystal clear, high gloss, self-levelling |
| Coverage | 1 litre ≈ 1 m² @ 1 mm thickness |
| Full cure | Approx. 72 hours |
Performance benefits
- Excellent clarity and depth for a clean, professional finish
- Self-levelling formulation for smooth, even coatings
- Low viscosity for easy spreading and effective bubble release
- UV-resistant formulation designed to reduce yellowing over time
- Durable cured surface suitable for long-term artwork and display pieces
Ideal applications
Suitable for a wide range of creative projects, including:
- Resin art and abstract artwork
- Canvas coatings and mixed media
- Timber artwork and sealed wood surfaces
- Coasters, trays, and decorative items
- Pigments, mica powders, and colour work
- Jewellery, moulds, and craft applications
Technical overview
Coverage
Coverage is based on a smooth, non-porous surface:
1 litre covers approximately 1 m² at 1 mm thickness.
How to use
- Measure Part A and Part B at a 1:1 ratio by volume.
- Mix thoroughly for a minimum of 3 minutes, scraping the sides and base.
- Pour, allow to self-level, then remove surface bubbles with gentle heat.
Note: Seal porous surfaces prior to coating to help prevent air release and resin absorption.
Kit contents
- 2 litre Resin (Part A)
- 2 litre Hardener (Part B)
Total mixed volume: 4 litres
Product storage
Keep containers tightly sealed when not in use. Store at room temperature (approximately 18 °C) and away from direct sunlight. Do not store containers directly on concrete floors.
Safety directions
Use in a well-ventilated area. Avoid contact with eyes and skin. Protective gloves, mask and safety glasses should be worn when mixing and using this product.
Over-exposure may cause sensitisation. Uncured material can be removed using a suitable solvent or methylated spirits, followed by washing with warm soapy water.
Always wear a suitable mask when using solvent-based cleaners.
